Re: Wood floor sanding and varnishing
Posted by Yardl3y on 2011/8/19 19:25:27
Hi all, so I had the floors repaired with reclaimed white pine which is what I was told my original floors are. However, after sanding everything down, the reclaimed wood looks very different than the original. The picture below is test patch with sealer applied. The lighter wood is my original floor and the darker is the "reclaimed" wood, again this is with sealer applied. I really need some help/suggestions on getting the two to match. I wanted to go with a clear coat but I think the difference is too noticeable between the two and it would look like a big patch.
In this picture you can see the patch/repair against the rest of the floor. I have a repair like this in every room in the house.
This Post was from: http://jclist.com/modules/newbb/viewtopic.php?post_id=274989